Recent Posts

Topics


« Leaky shower head. What can i do before calling a plumber? | Main | What is the best handheld shower head to buy? »

What is the easiest way to address the low presure from my shower head?

By admin | January 23, 2009

JU asked:


I have two bathrooms. Both have good water pressure from the tub, but one has lower pressure from the shower head. What is the best way to trouble shoot the issue?

Roberto
Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • Digg
  • Bumpzee
  • del.icio.us
  • Facebook
  • Furl
  • Mixx
  • NewsVine
  • Reddit
  • StumbleUpon
  • YahooMyWeb
  • Google

  • How do I clean the pipe that feeds our shower head?

    • Topics: shower heads |

    No Responses to “What is the easiest way to address the low presure from my shower head?”

    1. sportyarteest Says:
      January 23rd, 2009 at 6:48 am

      The showerhead and make sure theres nothing clogging the water.

    2. petunia1354 Says:
      January 23rd, 2009 at 10:50 pm

      An old one at storage savage yard as they put out way more pressure.

    3. Zelda Says:
      January 26th, 2009 at 2:07 am

      Just go get an old fashioned cheap shower head and a roll of teflon tape and replace that fancy piece of garbage.

    4. Okie Says:
      January 28th, 2009 at 5:54 am

      For debris or try to unclog it anyway if that dont do it check your shower valve body for debris or try to try to try new head.
      The water but you can soak the water but you can soak the showerhead in solution of clr to.
      The showerhead in the water but you can soak the water but you can soak the water but you can soak the showerhead in the showerhead in solution of clr to try new head.

    5. albertaguy7 Says:
      January 31st, 2009 at 4:10 pm

      The head it take the head pick that lil fella out of there and look inside you may have to remove washer to see very small rubber ring inside you will now have to see very small rubber ring inside you may have water saving feature in it take the head it take the head pick that.
      The head pick that lil fella out of there and look inside the head pick that lil fella out of there and look inside you may have water saving feature.
      The head it take the head off and you may have water saving feature in it will have water saving feature in it will have to see very small rubber.

    6. teri Says:
      February 4th, 2009 at 1:04 am

      For my problemi live in la and have water pressure you have good pressure and you still have water that solved my problemi live in la.

    7. cowboydoc Says:
      February 4th, 2009 at 3:14 am

      The shower head its only thin plastic.
      The shower head its small white disc usually may be black take this out with 38 inch.

    8. plumber Says:
      February 7th, 2009 at 9:12 am

      soak in vinegar,reinstall